In telecommunications, data-transfer rate is the average number of bits (bitrate), characters or symbols (baudrate), or data blocks per unit time passing through a communication link in a data-transmission system. Common data rate units are multiples of bits per second (bit/s) and bytes per second (B/s). For example, the data rates of modern residential high-speed Internet connections are commonly expressed in megabits per second (Mbit/s).
Video Data-rate units
Standards for unit symbols and prefixes
Unit symbol
The ISQ symbols for the bit and byte are bit and B, respectively. In the context of data-rate units, one byte consists of 8 bits, and is synonymous with the unit octet. The abbreviation bps is often used to mean bit/s, so that when a 1 Mbps connection is advertised, it usually means that the maximum achievable bandwidth is 1 Mbit/s (one million bits per second), which is 0.125 MB/s (megabyte per second), or about 0.1192 MiB/s (mebibyte per second). The Institute of Electrical and Electronics Engineers (IEEE) uses the symbol b for bit.
Unit prefixes
In both the SI and ISQ, the prefix k stands for kilo, meaning 1,000, while Ki is the symbol for the binary prefix kibi-, meaning 1,024. The binary prefixes were introduced in 1998 by the International Electrotechnical Commission (IEC) and in IEEE 1541-2002 which was reaffirmed on 27 March 2008. The letter K is often used as a non-standard abbreviation for 1,024, especially in "KB" to mean KiB, the kilobyte in its binary sense. In the context of data rates, however, typically only decimal prefixes are used, and they have their standard SI interpretation.
Variations
In 1999, the IEC published Amendment 2 to "IEC 60027-2: Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics." This standard, approved in 1998, introduced the prefixes kibi-, mebi-, gibi-, tebi-, pebi-, and exbi- to be used in specifying binary multiples of a quantity. The name is derived from the first two letters of the original SI prefixes followed by bi (short for binary). It also clarifies that the SI prefixes be used only to mean powers of 10 and never powers of 2.
Maps Data-rate units
Decimal multiples of bits
These units are often used in a manner inconsistent with the IEC standard.
Kilobit per second
kilobit per second (symbol kbit/s or kb/s, often abbreviated "kbps") is a unit of data transfer rate equal to:
- 1,000 bits per second
- 125 bytes per second
Megabit per second
megabit per second (symbol Mbit/s or Mb/s, often abbreviated "Mbps") is a unit of data transfer rate equal to:
- 1,000 kilobits per second
- 1,000,000 bits per second
- 125,000 bytes per second
- 125 kilobytes per second
Gigabit per second
gigabit per second (symbol Gbit/s or Gb/s, often abbreviated "Gbps") is a unit of data transfer rate equal to:
- 1,000 megabits per second
- 1,000,000 kilobits per second
- 1,000,000,000 bits per second
- 125,000,000 bytes per second
- 125 megabytes per second
Terabit per second
terabit per second (symbol Tbit/s or Tb/s, sometimes abbreviated "Tbps") is a unit of data transfer rate equal to:
- 1,000 gigabits per second
- 1,000,000 megabits per second
- 1,000,000,000 kilobits per second
- 1,000,000,000,000 bits per second
- 125,000,000,000 bytes per second
- 125 gigabytes per second
Decimal multiples of bytes
These units are often not used in the suggested ways; see above section titled "variations".
Kilobyte per second
kilobyte per second (kB/s) is a unit of data transfer rate equal to:
- 8,000 bits per second
- 1,000 bytes per second
- 8 kilobits per second
Megabyte per second
megabyte per second (MB/s) is a unit of data transfer rate equal to:
- 8,000,000 bits per second
- 1,000,000 bytes per second
- 1,000 kilobytes per second
- 8 megabits per second
Gigabyte per second
gigabyte per second (GB/s) is a unit of data transfer rate equal to:
- 8,000,000,000 bits per second
- 1,000,000,000 bytes per second
- 1,000,000 kilobytes per second
- 1,000 megabytes per second
- 8 gigabits per second
Terabyte per second
terabyte per second (TB/s) is a unit of data transfer rate equal to:
- 8,000,000,000,000 bits per second
- 1,000,000,000,000 bytes per second
- 1,000,000,000 kilobytes per second
- 1,000,000 megabytes per second
- 1,000 gigabytes per second
- 8 terabits per second
Conversion table
Examples of bit rates
See also
- Binary prefix
- Bit rate
- List of device bandwidths
- Orders of magnitude (bit rate)
- Orders of magnitude (data)
- SI prefix
Notes
References
- International Electrotechnical Commission (2007). "Prefixes for binary multiples". Retrieved on 2007-05-06.
- IEC 60027-2 "Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics+
- Donald Knuth: "What is a kilobyte?"
External links
- Valid8 Data Rate Calculator
Source of article : Wikipedia